Hardware specifications – NETGEAR MS510TXPP 8 Port Gigabit PoE Managed Switch User Manual

Page 352

Advertising
background image

Smart Managed Pro Switches MS510TX and MS510TXPP

Hardware Specifications and Default

Settings

User Manual

352

Hardware Specifications

Table 74. Hardware specifications

Feature

Description

Interfaces

Nine Ethernet RJ-45 ports and one fiber SFP+ ports:

• Ports g1–g4

. 1 Gbps Ethernet ports

• Ports mg5–mg6

. 2.5 Gbps Multi-Gigabit Ethernet ports

• Ports mg7–mg8

. 5 Gbps Multi-Gigabit Ethernet ports

• Port xmg9

. 10 Gbps Multi-Gigabit Ethernet port

• Port xg10

. Fiber port (SFP+)

Flash memory size

256 MB NAND

SDRAM size and type

512 MB DDR3 SDRAM

Switching capacity

Non blocking full wire speed on all packet sizes

Forwarding method

Store and forward

Packet forwarding rate

• 1G

. 1,488,000 pps

• 2.5G

. 3,720,000 pps

• 5G

. 7,440,000 pps

• 10G

. 14,880,000 pps

MAC addresses

16 K

Green Ethernet

Automatic power-down mode on a port when the link is down

Short cable mode

EEE mode

Supported protocols and standards

TCP/IP

UDP

HTTP

ICMP

TFTP

DHCP

IEEE 802.1D

IEEE 802.1 p

IEEE 802.1Q

IEEE802.3 1000BASE-T and 10GBASE-T

IEEE802.3az (EEE)

IEEE 802.3bz NBASE-T and MGBASE-T

IEEE 802.1af (PoE)

IEEE 802.1at (PoE+)

IEEE 802.3ad Link aggregation (LAG with LACP)

IEEE 802.1ab LLDP

IEEE 802.1x RADIUS network access control

Advertising