Teradek Ranger Micro 5000 3G-SDI/HDMI Wireless Receiver - Manual (Page 10)

Using a reverse polarity or improperly − constructed power cable can damage the product and
is not covered under warranty. To prevent the inputs from being damaged, best practice is to
plug in the power cable first, THEN connect the video cable from the camera before powering
on the TX unit.
Mounting
Ranger devices have a 1/4”-20 and 3/8"-16 threaded holes on the bottom for mounting the included
light stand adapter or any other mounting accessories. Additionally, Ranger devices are equipped with a
dual-mount battery plate that allows you to attach your device to either the back of a camera, monitor, or
Array Antenna.
• Mount the transmitter onto the back of your camera keeping the antennas clear of any obstructions.
• Orient the transmitter and receiver antennas so they are parallel to each other.
• For best results, orient the transmitter antennas so each one has a clear line-of-sight to the receiver.
 CAUTION: DO NOT OVERTIGHTEN SCREWS INSERTED INTO THE THREADED HOLES . Doing
so can damage the device's chassis and internal components, voiding the warranty.
Teradek User Manual
Page 10 Ranger Micro | Mk II