Teradek Ranger Micro 5000 3G-SDI/HDMI Wireless Receiver - Manual (Page 73)

Supported A/C adapters:
● 9V 2.0A (18W)
● 12V 1.5A (18W)
● 12V 3.0A (included with Bolt 4K)
● 12V 2.5A (30W)
● 24V 2.5A (60W)
Not supported:
● 12V 1.25A (15W)
Can I install battery plates on my Bolt 4K units myself?
Yes. Recent changes to the device's chassis allows the user to assemble and install battery plates on
either the receiver or transmitter. Earlier Bolt 4k units required battery plates to be installed only by a
trained technician at a Certified Teradek Repair Center. Contact Teradek to verify if your device's
metalwork is the latest.
Ranger Mk II System
TRANSMITTER RECEIVER
VIDEO
Video Inputs
1x 12G-SDI SMPTE 2082-1 standard/
75 Ω ,
1x HDMI 2.0 Type-A receptacle
N/A
Video Outputs
1x 12G-SDI SMPTE 2082-1 standard /
75 Ω (BNC x 1)
2x 12G-SDI SMPTE 2082-1 standard/75
Ω ,
1x HDMI 2.0 Type-A receptacle
Color Sampling
SDI : YCbCr 4:2:2, 10-bit
HDMI : RGB / YCbCr 4:4:4, 8-bit | YCbCr
4:2:2 10-bit
SDI : YCbCr 4:2:2, 10-bit
HDMI : RGB / YCbCr 4:4:4, 8-bit | YCbCr
4:2:2 10-bit
Delay (TX to RX)
<0.001sec (without format
conversions)
<0.001sec (without format conversions)
Teradek User Manual
Page 73 Ranger Micro | Mk II