Teradek Ranger Micro 5000 3G-SDI/HDMI Wireless Receiver - Manual (Page 12)

◦ Auto Mode - ( Default ) Transmitter automatically determines how many fine antennas are needed
based on the range and signal quality.
◦ Longer Distance Mode - ( One fine antenna ) Maintains the maximum range in situations where other
sources of interference might be present but will slightly reduce your video signal’s maximum
quality.
◦ Better Quality Mode - ( Two fine antennas ) Maintains higher signal quality, but reduces the maximum
range.
◦ Best Quality Mode - ( Three fine antennas ) Ideal for complex, high-contrast scenes that require the
highest possible quality.
◦ Low Power Mode - ( One fine antenna with shorter range ) Reduces the transmitter's total power
consumption by about 1.5W, and may reduce any unwanted interference in multi-system
environments.
Video Settings
HDMI/SDI Output Format (RX only) - Select the video output format. You can match the video source’s
resolution ( Same As Input ) or choose from the resolutions listed. If using the receiver with a recorder or
monitor sensitive to video signal changes, select Continuous Output to ensure the signal stays constant
even if the link is interrupted. Note that this adds a small delay to the video output.
Video OSD Settings (RX Only) - Choose when to display the OSD.
◦ Never show - Disable OSD.
◦ Show when operating - Hide OSD until it is activated by the joystick.
◦ Show when no video - Display the OSD when there is no video feed; hide the OSD when video
appears (default).
◦ Always show - Always display OSD unless temporarily deactivated by the joystick.
Display Settings - Use the Display Settings to control the OLED display operation. By default, the OLED
display will invert every 30 minutes.
Tools
SDI Eye Pattern (TX only) - The SDI Eye Pattern provides a graphical display of the SDI signal coming
from the camera to the transmitter, and is useful in determining the amount of interference present. The
size of the "eye" displayed on the front panel indicates the quality of the SDI signal. The bigger the size
of the eye pattern is, the better the SDI signal.
Signal Quality Graph (RX Only) - The Signal Quality Graph indicates the quality and reliability of the
signal being received according to the amount of interference that is present between the RX and TX.
Signal Quality is represented in percentages:
Teradek User Manual
Page 12 Ranger Micro | Mk II