Teradek Ranger Micro 5000 3G-SDI/HDMI Wireless Receiver - Manual (Page 23)

PAIRING VIA RANGER MANAGER
To Pair:
1. Open the Launchpad App from your iOS or Android device, then tap the Pairing button.
2. Select the transmitter you wish to pair, then tap the Next button.
3. Select the receiver(s) you wish to pair with the transmitter, then tap the Pair! button. The Launchpad
App will indicate when the pairing process is complete.
To Unpair:
1. Open the Launchpad App from your iOS or Android device, then tap the settings button (3 dots) on
the top right corner of the screen.
2. Enter the Pairing menu, select the receiver(s) you wish to unpair, then tap the Unpair button.
Power Cables
2-Pin Power Connector
Ranger devices use a locking 2-pin power connector similar to the 0B 302 series LEMO connector.
* Pin 1 is closest to the red dot on the connector.
Input Voltage: 7-28V DC (TX and RX)
Max Power Consumption: 9W (TX) and 11W (RX)
Custom/3rd Party Cables
• Test the power cable polarity with ONLY the power cable connected to Ranger. Do not connect video
cables.
• Check the power cable for shorts and proper grounding.
Teradek User Manual
Page 23 Ranger Micro | Mk II