Teradek Ranger Micro 5000 3G-SDI/HDMI Wireless Receiver - Manual (Page 66)

• Use ONLY a UL/IEC 62368 or UL/IEC 60950-1 2nd revision approved AC/DC power adapter class
LPS with an electrical output rating range of 6-28 V DC, 3A, with an ambient temperature range of
0°C to 40°C.
• Use of an alternative AC/DC power adapter will invalidate any approvals given to this unit and may
be dangerous.
BATTERY
This device is not supplied with batteries. In case a battery is used, please adhere to the following
general battery usage guidelines:
• Use batteries with the rated voltage and current characteristics as listed in the manual.
• Use IEC 62133-approved lithium batteries such as the
Anton Bauer Digital Battery (Dionic XT 150/
Dionic XT 90).
• Verify battery temperature is within the range specified.
• Do not use incompatible/incorrect batteries. Use of an incompatible battery may present a risk of
fire, explosion, leakage, or other hazards.
• Severe impact from dropping any battery-operated device on a hard surface could cause the battery
to overheat.
RF MODULES
These devices contain the following approved radio modules:
Device Description IC FCC ID
AMN41012 HD Video Transmitter 7680A-AMN41012 VQSAMN41012
AMN42012 HD Video Receiver 7680A-AMN41012 VQSAMN41012
2832 BT Module 4492A-2832 HSW2832
RF EXPOSURE
The product complies with internationally recognized standards covering human exposure to
electromagnetic fields from radio devices. To satisfy local RF exposure regulation requirements, the
transmitting product must operate with a minimum separation distance of 20 cm or more from a
person’s body.
FCC RF EXPOSURE STATEMENT
This equipment complies with the FCC RF radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body. This transmitter must not be
co-located or operating in conjunction with any other antenna or transmitter.
Teradek User Manual
Page 66 Ranger Micro | Mk II