Teradek Ranger Micro 5000 3G-SDI/HDMI Wireless Receiver - Manual (Page 44)

Pairing and Unpairing
Ranger devices purchased as a set (TX and RX) are paired by default, requiring no additional
configuration. Ranger devices purchased separately need to be paired using the device's front panel
(OLED) menu,
Launchpad , or the Ranger App . You will need to use either Launchpad or the Ranger App
to pair your transmitter with multiple receivers.
NOTE: Before starting either pairing process, ensure that both the transmitter and receiver have the
same firmware version and have Bluetooth enabled.
Pairing/Unpairing via the Front Panel
TO PAIR:
1. Using the Menu Joystick, navigate to the Pair menu on both the transmitter and the receiver.
2. Select Pair to begin the pairing process. The transmitter will begin scanning for a receiver within
range and automatically pair to the receiver.
3. Once paired, the front panel will indicate whether or not Pairing is successful.
TO UNPAIR:
1. Navigate to the Unpair menu on either the transmitter and the receiver.
2. Select the transmitter/receiver you want to unpair. If you have multiple devices paired, you can select
Unpair All .
 PAIRING TIPS
Teradek User Manual
Page 44 Ranger Micro | Mk II