Troubleshooting/faq – Teradek Ranger Micro 5000 3G-SDI/HDMI Wireless Receiver User Manual
Page 71
SUPPORT RESOURCES
In addition to this Reference Guide, you can find more information on Ranger devices' features and
operation by visiting www.teradek.com. If you are unable to find what you need online, please contact
Teradek’s support staff.
E-mail: [email protected] | Phone: (888) 941-2111 ext. 2 (available M-F 7 am-6 pm PST)
DISCLAIMER
This manual is intended for user information only. Every effort has been made to ensure that the
contents within are accurate at the time of printing and that updates are made promptly. Teradek
cannot be held responsible for inaccuracies, typographical errors, or out-of-date information contained
within this manual.
Troubleshooting/FAQ
For more Troubleshooting and FA
Can I down-convert from 4K to HD to display video on an HD Monitor?
Yes. Even if you feed the transmitter a 4K signal, you can output an HD signal from a paired receiver.
Output settings are configured on the receiv
.
Will Bolt 4K work with my current Bolt?
No. Previous generation Bolts cannot communicate with Bolt 4K. Bolt 4K uses a different RF system
along with a unique chipset not found in any of the previous generation Bolts.
Does Bolt 4K support SDI Metadata/ancillary data passthrough?
Bolt 4K supports a limited subset of SDI ancillary data (metadata) from certain cameras. The following
data can be passed wirelessly from the transmitter to the receiver:
●
Start/stop record flags
●
Time code
●
File/clip name (RED and ARRI cameras)
Teradek User Manual
Page 71
Ranger Micro | Mk II