Teradek Ranger Micro 5000 3G-SDI/HDMI Wireless Receiver - Manual (Page 52)

HDMI (RX only)
Ranger supports all HDMI output modes. You can select from one of the following options:
• Auto
• RGB 8bit
• RGB 10bit
• YCbCr 4:4:4 8bit
• YCbCr 4:4:4 10bit
• YCbCr 4:2:2 10bit
• YCbCr 4:2:0 8bit
• YCbCr 4:2:0 10bit
AUDIO (RX only)
Configure Ranger’s Audio settings. If Beep on REC is activated, you will hear a short tone whenever the
camera begins or stops recording. The Mute Settings allow you to completely mute the audio or only
mute audio while recording.
• Beep on REC - Short tone when the camera begins or stops recording
• Mute Settings - Select an option:
• Off
• Mute while recording
• On
BLUETOOTH
Use the Bluetooth menu to enable or disable Bluetooth communication.
• Enable Bluetooth - Allows transmitter and receiver to be paired and communicate with the
Launchpad App.
• Use Bluetooth PIN - Enables the use of a PIN for authentication when using the Launchpad App.
• Change PIN - Press the Menu joystick towards the right to change the Bluetooth PIN
NOTE: Bluetooth is disabled by default. To configure your Ranger devices via the Launchpad App, you
must first enable Bluetooth.
BACKGROUND COLOR (RX only)
The Background Color feature allows you to select a screen color to be displayed on the monitor when
no video is received from the transmitter. This useful tool indicates to the crew that a signal has been
dropped and the TX and RX need to be synced again.
Teradek User Manual
Page 52 Ranger Micro | Mk II