Henny Penny SMART COMBI FM05-061-A - Manual (Page 38)

3. Press C o m b i D i a l ( 9 ) to open the menu.
The multi-function display (4) shows “Password” and “000”.
4. Use C o m b i D i a l ( 9 ) to enter the password “111”.
5. Press S t a r t / S t o p ( 8 ) .
The multi-function display (4) shows the first parameter “Time/Date” with
the parameter number “000”.
6. Select the parameter using C o m b i D i a l ( 9 ) .
7. Set the parameter to the desired value with C o m b i D i a l ( 9 ) .
8. Press the right s e l e c t bu t t o n ( 6 ) to save the settings.
The display changes back to the parameter list.
9. Press the left s e l e c t bu t t o n ( 1 3 ) to exit the menu.
4.7.3 Displaying actual temperature values
The current cooking temperature can be displayed during operation.
→ Hold Cooking temperature (12) pressed for about 3 seconds.
The multi-function display (4) shows the current cooking temperature for
8 seconds. The target temperature is then shown again.
4.7.4 Set the cooking temperature
Requirements Unit is switched on
1. Press the cooking mode button.
100 C 0: 00
Steaming
01/
01
More
functions Home
The multi-function display (4) shows the preset cooking temperature and
the cooking time.
2. Set the cooking temperature with C o m b i D i a l ( 9 ) .
4.7.5 Setting the cooking time
NOTICE
Minimum: 1 minute.
Maximum: 23 hours, 59 minutes.
Global Foodservice Solutions
Operating manual 38
SmartCombi ™
Operation