Henny Penny SMART COMBI FM05-061-A - Manual (Page 59)

Explanation Possible settings Pre-set value Parameters No.
● “Minimum”: Minimum water con-
sumption but higher condensation
temperature and a greater volume
of waste steam.
● “Maximum”: Maximum water con-
sumption but low condensation
temperature and a low volume of
waste steam.
At this setting, the drain temperat-
ure is < 60 °C (140 °F).
Minimum, Normal,
Maximum Normal Cooling waste steam 024
An external extraction hood can be
switched on at the end of the program. 0–600 seconds 60 Time ext. hood (sec.) 083
0 = beep off 0–180 seconds 20 Beep time (sec.) 084
Altitude above sea level. Set to 0–500
m (1,640 ft.) if the altitude is not known. ● 0–500 m (1,640
ft.)
● 500 m (1,640
ft.)–1000 m (3,281
ft.)
● 1000 m (3,281
ft.)–1500 m (4,921
ft.)
● > 1500 m (4,921
ft.)
0–500 m. Altitude 015
Individual passwords can be con-
figured in this area. 000–500 111 Password 096
Rotation direction of C o m b i D i a l ( 9 )
in menus and in the SmartMenu pro-
gram memory. Normal/inverse Normal Scroll direction 225
The default cooking temperature for
this cooking mode can be set within
the shown limits. 30–130 °C 100 °C Temp. Steam 235
The default cooking temperature for
this cooking mode can be set within
the shown limits. 30–250 °C 130 °C Temp. Combi 236
The default cooking temperature for
this cooking mode can be set within
the shown limits. 30–300 °C 180 °C Temp. Convec. 237
The default cooking temperature for
this cooking mode can be set within
the shown limits. 30–180 °C 120 °C Temp. Regeneration 238
The default cooking temperature for
this cooking mode can be set within
the shown limits. 60–100 °C 60 °C Temp. LT cooking 239
The default cooking temperature for
this cooking mode can be set within
the shown limits. 1–100 °C 20 °C Temp. DT cooking 240
The default cooking temperature for
this cooking mode can be set within
the shown limits. 30–99 °C 60 °C Temp. T-Core 241
59 Operating manual
Global Foodservice Solutions
Operation
SmartCombi ™