Henny Penny SMART COMBI FM05-061-A - Manual (Page 76)

Remedy Possible causes Error
● Unit can be used (emergency operation)
●
Contact customer service
Waste water temperature measurement
faulty, cooling water is permanently turned
on Expelled steam
sensor broken
●
Unit can be used (emergency operation)
● Contact customer service
Humidity sensor faulty, humidity emergency
program is active Humidity sensor faulty
● Contact customer service Core temperature sensor or keypad defective HW faulty: UREF0 T-
measurement too high
●
Contact customer service Incorrect gas quality
Unit is defective
General gas fault
● Contact customer service Unit is defective No gas fan
● Repeat procedure for loading/saving File on USB memory stick is damaged Line too long
Missing s
●
Use another USB memory stick Insufficient memory on USB memory stick USB memory is full
●
Insert USB memory stick completely
● Use another USB memory stick
USB memory stick is not inserted
Faulty USB memory stick
USB not available
Table 9: Cause of errors and troubleshooting
Global Foodservice Solutions
Operating manual 76
SmartCombi ™
Faults