Henny Penny SMART COMBI FM05-061-A - Manual (Page 53)

4.10.4 Setting the preset start time
CAUTION
Dangers to health due to spoiled food
When using the preset start time feature, temperatures may occur in
the cooking chamber that encourage the growth of harmful germs.
→ Observe the provisions governing foodstuffs.
1. Select the cooking program.
2. Hold C o o k i n g t i m e ( 1 1 ) pressed.
The multi-function display (4) shows “Start in: 00:01”.
3. Set the delay period with C o m b i D i a l ( 9 ) .
If a program without core temperature measurement follows, the finish
time is shown. “Ready at: ”.
If a program with core temperature measurement follows, the target
core temperature is shown.
4. Press C o m b i D i a l ( 9 ) to confirm the preset start time.
The multi-function display (4) shows the remaining sdelay time and the
cooking chamber temperature.
Once the delay period has elapsed, the program that was set will be
started automatically.
NOTICE
The lighting in the cooking chamber is switched off during the delay
period.
5. Press the left s e l e c t bu t t o n ( 1 3 ) to end the preset start time.
4.10.5 Starting Ready2Cook (prepare for cooking)
The advanced function Ready2Cook heats if the cooking chamber is
too cold, cools if it is too hot and prepares the cooking climate for
cooking.
53 Operating manual
Global Foodservice Solutions
Operation
SmartCombi ™