Henny Penny SMART COMBI FM05-061-A - Manual (Page 57)

NOTICE
The end-of-step signal is activated as default for the last cooking step
of a program.
1. Press the left s e l e c t bu t t o n ( 1 3 ) when entering a cooking
program.
2. Select the end-of-step signal with C o m b i D i a l ( 9 ) .
3. Press the left s e l e c t bu t t o n ( 1 3 ) to return to the settings menu.
4.12 Changing standard settings
Requirements Unit is switched on
1. Press the left s e l e c t bu t t o n ( 1 3 ) to open the menu.
2. Use C o m b i D i a l ( 9 ) to select the “Settings” menu.
3. Use C o m b i D i a l ( 9 ) to enter the password “111”.
4. Press S t a r t / S t o p ( 8 ) .
5. Select the parameter with C o m b i D i a l ( 9 ) .
The multi-function display (4) shows the set value.
The parameter name flashes.
6. Press C o m b i D i a l ( 9 ) , to change the value.
The parameter value flashes.
7. Change the value with C o m b i D i a l ( 9 ) .
8. Press the right s e l e c t bu t t o n ( 6 ) or C o m b i D i a l ( 9 ) to adopt
the value.
The parameter name flashes.
9. Change other parameters as necessary.
10. Press the right s e l e c t bu t t o n ( 6 ) to save the changes.
or
→ Press the left select button (13) to discard the changes.
4.12.1 Set service interval water volume
In the “Settings” menu, you can specify the service interval by means
of the volume of used water.
1. Press the left s e l e c t bu t t o n ( 1 3 ) to open the menu.
2. Use C o m b i D i a l ( 9 ) to select the “Settings” menu.
57 Operating manual
Global Foodservice Solutions
Operation
SmartCombi ™