Henny Penny SMART COMBI FM05-061-A - Manual (Page 64)

NOTICE
Use additional cartridges if necessary:
- If heavily soiled: use 2 two-in-one cartridges. Select “WaveClean
extra” .
- If scaled: use a two-in-one cartridge + clear rinse cartridge.
5.1.4 Start WaveClean
Requirements Hard water and soft water taps are open
→ Close the chamber door and confirm with the right select button
( 6 ) .
The cleaning program starts. The multi-function display (4) shows the
remaining cleaning time.
5.1.5 Ending WaveClean
The unit switches itself off automatically when the cleaning process is
finished. The multi-function display (4) shows “Remove cartridge” when
the unit is restarted.
1. Open the cooking chamber door.
2. Remove the empty cartridge.
3. Rinse thoroughly by hand to remove any cleaner or rinsing agent
residues.
NOTICE
See Chapter “WaveClean faults”, Page 65 for possible causes of cleaner
residues in the cooking chamber.
4. Close the cooking chamber door.
5. Press the right s e l e c t bu t t o n ( 6 ) and confirm that the cartridge
has been removed.
6. Open the chamber door and leave it slightly ajar until the next use.
This will increase the life of the door seal.
No moisture will build up in the cooking chamber.
5.1.6 Cancelling WaveClean
The “WaveClean” automatic cleaning function can also be ended manually.
Power failure during cleaning also leads to the process being terminated.
Global Foodservice Solutions
Operating manual 64
SmartCombi ™
Cleaning