Henny Penny SMART COMBI FM05-061-A - Manual (Page 58)

3. Use C o m b i D i a l ( 9 ) to enter the password “111”.
4. Use C o m b i D i a l ( 9 ) to select the “Service water volume” menu.
5. Set the water volume (in 100 litre increments) with C o m b i D i a l ( 9 ) .
4.13 Standard settings
The unit is already pre-configured when delivered.
The values listed in the following table can be adjusted individually (see
Chapter “Changing standard settings”, Page 57 ).
Explanation Possible settings Pre-set value Parameters No.
Changeover summer time/winter time
is automatic. Date format: Parameter
144 Time/date The operator's
local time Time/date 000
Temperature display in °F is irrespective
of the system language. °C/°F in °C Temperature reading 006
On: At the end of the cooking time the
lighting flashes in addition to the
acoustic signal sounding. It flashes as
long as the signal sounds. On/off On Lighting flashes 023
Increase the preheat factor for full loads
of large masses (roasts, loaves of
bread) to prevent the temperature from
falling too much. 0–30 % 15 Preheat factor % 082
Applies for external water preparation
systems and only for the soft water
connection.
See Chapter “Set service interval water
volume”, Page 57 for further informa-
tion.
0–90000 l in 100 l in-
crements 0 Service water volume 076
DD = day
MM = month
JJJJ = year
● DD.MM.YYYY
●
YYYY/MM/DD
● MM/DD/YYYY
DD.MM.YYYY Date format 144
● Free: you can change,delete or save
programs
●
Blocked: you may not change,delete
or save programs. But you may
make changes during the cooking
process.
● Fully blocked: No changes are pos-
sible in the SmartMenu program
memory or during the cooking pro-
cess.
● Free
●
Blocked
● Fully blocked
Free SmartMenu program
memory 097
Set “fan cycle operation”. The temperat-
ure in the cooking chamber can be kept
to 14 °C (57.2 °F) for 6 h by placing an
ice block in the bottom drawer. On/off Off Time delay fan 032
Global Foodservice Solutions
Operating manual 58
SmartCombi ™
Operation