Henny Penny SMART COMBI FM05-061-A - Manual (Page 43)

78 C 60 C
Baked ham
53 ° 01/
02
1 2 4 3
5 6
Manual
Steam
1 Name of the program
2 Actual core temperature
3 Total number of program steps
4 Current program step
5 Target core temperature
6 Target chamber temperature
4.8.3 Ending the cooking program
The program is ended automatically after the cooking time is over or
when the core temperature is reached.
A signal sounds and the lighting in the cooking chamber flashes.
→ Press Star t/Stop (8) or open the door of the chamber to turn off
the signal.
or
→ Press Star t/stop (8) to end the program prematurely.
4.8.4 Display last program
1. Press S m a r t M e nu ( 2 ) .
2. Press C o m b i D i a l ( 9 ) .
3. Press the left s e l e c t bu t t o n ( 1 3 ) to display the last cooking
program.
The programs that were last used are shown, up to a maximum of ten.
4.8.5 Changing the cooking program during operation
You can change the cooking time, cooking temperature or target core
temperature for the individual cooking steps during operation by using
the buttons C o r e t e m p e ra t u r e ( 7 ) , C o o k i n g t i m e ( 1 1 ) , C o o k i n g
t e m p e ra t u r e ( 1 2 ) and C o m b i D i a l ( 9 ) .
43 Operating manual
Global Foodservice Solutions
Operation
SmartCombi ™