Muratec MFX-1500 - Manual (Page 100)

Beyond the basics
2.52
11. Use the numeric keypad to enter exactly the sub-address to identify this F-
Code box.
Note: The sub-address must be unique to this F-Code box; i. e., no other F-
Code box in this fax machine can have the same sub-address.
The sub-address can be up to 20 numbers in length. In this example, we’ve
entered 654321.
03:Sub-Address No.
654321_
Note: To erase previously entered characters, press CANCEL to erase leftward.
Or to change just one character in the number, press to move the
cursor leftward, or to move it rightward, to that character and press
CANCEL to erase it. Then re-enter until the number is just as you want it.
12. When the number is as you want it, press ENTER to store it.
Note: If you entered a sub-address number already being used by another
F-Code box, the machine will beep and briefly display the following:
03:Enter Sub-Address
Sub-Address In Use
The machine now returns you to step 11. Please enter a different number for
your F-Code box’s sub-address.
13. Next, the machine asks for your F-Code box’s password. This is the password
for
ITU - T -compatible F-Code fax transactions. (It is not a passcode your
machine uses to control who can make settings for the box.) If you set the
password, a caller must know and use it in order to send a fax to you via F-
Code communication. You don’t have to have a password to use the F-Code
box. However, using a password will make your F-Code communications
much more secure.
Important: Again, this is the password for ITU - T -compatible F-Code fax
transactions. It’s not the passcode the machine can use to control
user access to the F-Code box for, as an example, making
settings. You’ll make that setting a few steps down the line.
Depending on whether you already have a password entered for your F-Code
box, the display displays either:
03:Password
_ or 03:Password
123456789*#_
If you do wish to enter or change this box’s password, proceed to step 14.
If you do not wish to enter or change this box’s password, skip to step 15.
14. Use the numeric keypad to enter this box’s ITU - T -compatible password. This
password can be up to 20 characters in length and can include any
combination of numbers and the * and # characters (but no other non-
numerical characters). Here, we’ve entered 135*7#9.
03:Password
135*7#9_
Note: To erase previously entered characters, press CANCEL to erase leftward.
Or to change just one character in the password, press to move the
cursor leftward, or to move it rightward, to that character and press
CANCEL to erase it. Then re-enter until the password is just as you want.
15. Press ENTER . The display will show either:
Box Type :Bulletin
Program/Enter or Box Type :Security
Program/Enter
The machine is asking which box type you wish to assign to this box —
bulletin or security.
To select your desired box type (if it’s not already on the display), press
PROGRAM to display your choice.
16. Press ENTER .
If you chose Bulletin in step 15, proceed to step 17.
If you chose Security in step 15, skip to step 22.