Muratec MFX-1500 - Manual (Page 128)

Just in case …
3.8
What you see on the display What it means/What to do
Communication Error A communication error disrupted the reception or
transmission.
If you were transmitting, press
STOP to clear the error
message and then re-try the transmission. If you were
receiving a fax, try to contact the other person and
have him/her re-try the transmission. (The problem
may be entirely with his/her machine, phone line, etc.)
Copying Not Completed You tried to switch to the fax mode by pressing
COPY / FAX during copying from the multipurpose tray.
Complete the copying first, then try again.
Copy Off You tried to use your fax machine to make a copy, but
the unit’s copy protection feature (page 1.38) is on,
preventing such use.
Turn off copy protection.
Document Full You tried to enter a document into an F-Code box, but
the machine has reached its capacity.
Delete documents stored in F-Code boxes until the
machine will let you proceed.
Document Jam An original document jam while you are using the
ADF for either faxing or copying.
See page 3.2 for instructions on clearing the jam.
Document Stored You tried to erase a batch box which contains at least
one document.
Erase the document(s), then try again.
Drum Near End Your drum will need to be replaced soon.
Press
STOP to clear the message, then contact your
authorised Muratec dealer to purchase a new drum
cartridge if you don’t already have one.
Enter No. (0-32) You tried to enter a call group number greater than 32.
Your machine can maintain 32 call groups, numbered
1–32 (call group 0 covers all the groups).
Determine the correct call group identifier number
and enter it, instead.
What you see on the display What it means/What to do
Enter No. (1-99) You entered a number greater than 99 while trying to
print a database polling document. Your machine can
store 100 files, numbered 0–99, for database polling.
Determine the file’s correct number and enter it.
– or --
You tried to request greater than 99 copies from your
fax, which can create 1–99 copies of a document.
Select the correct quantity and enter it.
Enter Scan Size When you use the flatbed scanner ( FBS ), you must
manually enter the scan size of your document.
Press
BOOK DOC SIZE to choose the size.
Feeder In Use The command you’re trying to enter requires the use
of the
ADF , which is already in use.
Wait for the machine to stop using the ADF , then try
again.
Hang Up Phone The optional handset is off-hook.
Hang it up, making sure the upper part of the handset
presses down on the “hook” button.
In Secure Box You tried to store a document for polling in an F-Code
box which is set to be a security box.
Select an F-Code box which is set to be a bulletin box,
then try again.
Insert Document There was no document in the document feeder when
you tried to send a fax or make a copy.
Place a document and try again.
Invalid I . D . Code The SecureMail passcode you entered isn’t valid. Try
re-entering your SecureMail passcode.
Invalid Number You pressed a key which has no function during the
current operation.
Invalid Passcode The protection passcode you entered isn’t valid.
Repeat the operation, entering the correct protection
passcode.
Line Busy You tried to erase a document which someone is
polling from your machine.
Wait for the fax to complete the polling operation,
then try again.