Muratec MFX-1500 - Manual (Page 34)

Getting started
1.25
At the end of the operation, your fax machine beeps and displays:
972-555-2009
** Complete **
Important: Whenever you transmit, whether this way or in the numerous ways we’ll
describe throughout this manual, what actually appears on the top line of
the display will depend upon how the remote fax number is set. The line
may even be blank.
Note: What if the call fails for some reason? See pages 1.27–1.28.
Sending using the FBS
1. If the machine is already in Fax mode, skip to step 2.
If the machine is in Copy mode, press
COPY / FAX to change to Fax mode.
2. If there isn’t a document in the feeder, skip to step 3.
If there’s a document in the feeder, remove it.
3. Open the book cover.
4. Place the document face down on the FBS and align it with the document scale
on the right, then gently close the book cover.
Make sure the document is set beyond the right front corner.
CAUTION ! : Gently close the book-cover so that you don’t catch your
hands, possibly injuring them.
When a thick document, such as a book, is on the
FBS , do
not press strongly from the top of the book-cover. This may
break the contact glass and cause an injury.
5. Press BOOK DOC SIZE to select the document size, A 4, B 4, A 5 R or B 5 R .
B5
A5
B4
Enter Scan Size
A4
6. Adjust resolution and contrast if necessary.
If these are
OK , skip to step 7. Otherwise, as desired:
Press RESOLUTION to change the resolution.
Press CONTRAST , then press or to change the contrast.
7. Now, enter the fax number.
(In fax terms, you’re calling the remote fax, on its remote fax number.)
Use the numeric keypad to enter the number:
Press Start
919725552009_
As you can see, you also enter any access codes (such as a 9 for “dialling out”
from an office telephone system, or 1 for long-distance) along with the
number, just as you would for a regular phone call.
. . . or . . .
Press a one-touch key to dial the number. (See page 2.8)
. . . or . . .
Press SPEED DIAL / TEL INDEX once, followed by a three-digit speed dial
number, to dial the number. (See page 2.11)
. . . or . . .
Press SPEED DIAL / TEL INDEX twice and search for the name to dial the
number. (See page 2.14)