Muratec MFX-1500 - Manual (Page 125)

Just in case …
3.5
Print quality problems
If your machine’s printouts (received faxes or copies) develop quality problems,
check the following descriptions and, when you find the one which appears to be like
yours, try the suggested solutions. If the problems do not go away, please contact
your authorised Muratec dealer.
Pages are blank
•
The drum cartridge or toner cartridge may not be installed
correctly.
Install each cartridge correctly.
•
The toner cartridge may be out of, or very low in, toner.
Remove the toner cartridge and shake it a few times to
redistribute the toner inside.
If the problem persists, replace the toner cartridge.
• The toner cartridge may be defective.
Remove and check the toner cartridge for damage.
If the problem persists, replace the toner cartridge.
Pages are black
•
The toner cartridge may be defective.
Remove and check the toner cartridge for damage.
If the problem persists, replace the toner cartridge.
•
Your fax machine’s printer may be due for a service check.
Call your authorised Muratec dealer.
Printouts are too light
• The toner cartridge may be out of, or very low in, toner.
Remove the toner cartridge and shake it a few times to
redistribute the toner inside.
If the problem persists, replace the toner cartridge.
•
The toner cartridge may be defective.
Remove and check the toner cartridge for damage.
If the problem persists, replace the toner cartridge.
Printouts are too dark
•
The toner cartridge may be defective.
Remove and check the cartridge for damage.
If the problem persists, replace the toner cartridge.
Printouts have a blurred background
•
The toner cartridge may be defective.
Remove and check the cartridge for damage.
If the problem persists, replace the toner cartridge.
Printouts are of uneven density
• The toner may be unevenly distributed inside the toner cartridge.
Remove the cartridge and shake it a few times to redistribute the
toner inside.
• The drum cartridge may be defective.
Remove and check the drum cartridge for damage.
If the problem persists, replace the drum cartridge.