Muratec MFX-1500 - Manual (Page 5)

Welcome to your Muratec fax/copier!
We know you want to use your machine now, without first
having to climb over a mountain of jargon. So we’ve divided
these instructions into three sections.
•
“Getting started” (see page 1.1) covers only what you
absolutely have to know to use your machine immediately.
•
“Beyond the basics” (see page 2.1) provides more
details. When you have time, look through it to learn more
about your machine’s many features, as well as fax in
general.
•
Finally, “Just in case . . . ” (see page 3.1) will help you
decide what to do if you ever have a problem with your
machine. It also tells you how to give it the kind of easy,
sensible care that should help keep troubles to a minimum.
The next three pages show you the entire contents of these
instructions. Skim through them now if you’d like (they’ll
prove more helpful as time passes), or just go on past them to
“Getting started” and, well, get started!
And thanks for choosing Muratec.
Find your serial number and write it down
Before you go any further,
please note that your machine’s
serial number is located on the
bar code label as shown on the
drawing at right. Due to the size
of your machine, it’s probably a
good idea for you to copy this
down before you set up your
machine. Use the blank at the
bottom of this column.
Close up, the bar code label looks some-
thing like this:
Important: Of course, this is not the
number which should appear on your machine’s label! Rather, this is
only to give you an idea of how your label will look.
Now, please copy down your machine’s serial number, below, for future reference:
My machine’s model number: MFX-1500
My machine’s serial number:
Bar code label ID label
D 7 1 0 0 1 1 0 0 0 1 0 0 1 * 8 C A