Muratec MFX-1500 - Manual (Page 52)

Beyond the basics
2.4
Reduction margin
Your fax machine’s reduction margin is measured in millimetres (mm). We’ll define it
by explaining how it’s used:
When a fax message enters your machine, it measures the message’s length and
compares it to
(a)
the length of your selected paper plus
(b) the reduction margin you have set.
If the length of the incoming message is shorter than the sum of (a) and (b), your
machine prints the message on just one sheet; otherwise, it prints the message on
more than one sheet.
Note: An Auto reduction setting and a reduction margin setting of 24 mm will print
most incoming faxes as single pages. Try this combination first and then, only
if you have problems with it, select different settings.
Half-page reception
Half-page reception is especially handy for saving paper if some of the faxes you
receive are half-page, “memo-sized” messages. When activated, this feature tells the
machine to combine two of these half-page receptions onto a single sheet. Half-page
reception combines separate half-page messages sent back-to-back during the same
transmission. If you have half-page reception turned on, your fax won’t hold a
standard one half-page reception in memory until a second half-page message
follows.
Making the printing settings
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY / FAX to change to Fax mode.
2. Press PROGRAM , J , 0, 2, ENTER . The display shows the currently set print
reduction rate:
Prnt Reduc Rate:Auto
Program/Enter
If the setting you see is acceptable, skip to step 4.
Otherwise, proceed to step 3.
3. To change the setting, press PROGRAM repeatedly until your chosen reduction
setting appears. In this example, we’ve chosen 91%.
Prnt Reduc Rate: 91%
Program/Enter
4. Press ENTER to save the setting. The display shows the current settings for the
reduction margin:
Prnt Reduc Rate: 91%
Margin(0-85mm): 24
If the setting you see is acceptable, skip to step 6.
Otherwise, proceed to step 5.
Note: This reduction margin setting will affect ADF (not FBS ) copying.
5. To change setting, use the numeric keypad to enter the reduction margin you
want. If necessary, press
PROGRAM to move the cursor. In this example, we’ve
chosen 35mm.
Prnt Reduc Rate: 91%
Margin(0-85mm): 35
6. Press ENTER to save the setting. The display now shows the machine’s current
setting regarding half-page reception:
Half Page Recpt: Off
Program/Enter
If the setting you see is acceptable, skip to step 8.
Otherwise, proceed to step 7.
7. To change the setting, press PROGRAM once or twice until your choice
appears. In this example, we’ve chosen On.
Half Page Recpt: On
Program/Enter
8. Press ENTER to save the setting.
Setting the number of rings
You can set how many times your fax machine will ring before answering a call. You
may choose one to nine rings.
1. If the machine is in Fax mode, proceed to step 2.
If it is in Copy mode, press
COPY / FAX to change to Fax mode.
2. Press PROGRAM , J , 0, 5, ENTER . The display will show:
Set # Of Rings
# (1-9): 2
If the setting you see is acceptable, skip to step 4.
Otherwise, proceed to step 3.