Muratec F-160 - Manual (Page 35)

Beyond the Basics
4 Use the numeric keypad to enter the reduction margin you want. If necessary,
press or /
PROGRAM to move the cursor. Here, we’ve chosen 00mm.
5 Press ENTER to save the setting.
Setting the number of rings
You can set how many times your fax machine will ring before answering a call.
Choose from 1 to 9 rings.
1 Press / PROGRAM , J , 0, 6, ENTER . The LCD shows:
2 Use the numeric keypad to enter the number of rings you want, from 1 to 9.
Here, we’ve chosen 4 rings.
Note: If you enter 0 (zero), the machine will beep briefly to warn you that it
can’t accept that setting.
3 Press ENTER to save the setting.
Setting
ECM
“Line noise,” or static on the line during a call, can easily disrupt the flow of data
from one fax machine to another.
That’s why your fax machine gives you the option of using Error Correction Mode
(
ECM ). When two fax machines communicate while running in ECM , the sending
machine automatically checks the data as it sends. If the receiving fax machine can’t
verify the transmission, the first machine will re-send it as necessary.
Note: ECM gives you a better chance of transmitting a fax document over a bad
phone line, but it could also slow down the transmission time. And the worse
the line is, the slower the transmission. That’s why the machine lets you
turn
ECM on or off as needed.
Note: Not all fax machines have ECM . If you’ve activated ECM and then transmit to
a fax machine not currently using ECM , there will be no change in the fax
transmission from a usual, non- ECM transmission.
1 Press / PROGRAM , J , 0, 8, ENTER . The LCD shows the current ECM setting:
2 Press or / PROGRAM until the mode you want appears.
In this example, we’ve chosen Off.
3 Press ENTER to save the setting.
ECM Mode: Off
Program/Enter
ECM Mode: On
Program/Enter
Set # Of Rings
# (1-9): 4
Set # Of Rings
# (1-9): 2
Copy Reduc Rate: 75%
Margin(00-85mm): 00
2.4