Muratec F-160 - Manual (Page 73)

Beyond the Basics
2 Use the numeric keypad to enter the two-digit number (01-50) of the F-Code
security box that holds the documents you want to print. We’ve entered 03:
3 Press ENTER . The LCD shows:
4 Use the numeric keypad to enter your F-Code box’s four-digit I . D . code.
Here we’ve entered 2345:
5 Press ENTER .
• If you’ve entered the correct I . D . code, your fax machine prints all docu-
ments in the F-Code security box and then erases them.
• If you’ve entered an incorrect I . D . code, your fax machine aborts the opera-
tion and returns to standby mode.
Note: If the F-Code security box is not storing any documents, the machine
briefly displays the following before returning to standby mode:
Using a relay box
Once your fax machine receives a document via ITU - T sub-addressing to one of its F-
Code relay boxes, it sends it to the other fax machines that you’ve set up on your
relay box. (See “Creating or Modifying an F-Code box”, page 2.35)
If you set the Auto print mode to on when you created the relay box, your machine
will print the received document, then relay it to the other machine. Otherwise,
your machine will only relay it to the other machines, not print it. See page 2.39 for
more details on this setting.
Also, you can send (relay broadcast initiation) the document to another hub
machine’s F-Code box and get that machine to relay it to others. See “F-Code trans-
mission and polling” on page 2.43 for more detail.
The hub performs a relay broadcast, and the machine which sends the original doc-
ument to the hub has performed a relay broadcast initiation.
Erasing an empty F-Code box
An F-Code box must be empty in order to erase it. (If you select an F-Code box in
these steps which is not empty, the machine beeps. If this happens, print all docu-
ments in that box before erasing it.)
To erase an empty F-Code box:
1 Press / PROGRAM , P , 5, ENTER . The LCD shows:
or
2 Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box you want to erase. Here, we’ve entered 0, 3 and see:
3 If you want to erase a different F-Code box than the one that appears on the
LCD , enter the box number now.
4 Press ENTER . If the F-Code box is empty, the LCD shows:
Important: If you select an F-Code box which is not empty, the machine
beeps and, before returning to step 3, briefly displays:
Print any documents received in the F-Code box, then repeat
this procedure from the beginning to erase the box.
Otherwise, select another F-Code box.
5 Use the numeric keypad to enter the four-digit I . D . code.
Here, we’ve entered 2345:
03:Erase F-Code Box
Enter I.D. Code:2345
Select F-Code Box
Box In Use
03:Erase F-Code Box
Enter I.D. Code:****
Select F-Code Box
03:Muratec America
Select F-Code Box
01:Murata Machinery Select F-Code Box
01:No Number Stored
03:Print F-Code Doc.
No Document Stored
03:Print F-Code Doc.
Enter I.D. Code:2345
03:Print F-Code Doc.
Enter I.D. Code:****
Select F-Code Box
03:Muratec America
2.42