Muratec F-160 - Manual (Page 92)

Beyond the Basics
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine’s
memory and the
MEMORY RECEIVE light comes on. But the fax is not printed.
To retrieve the faxes received during this security reception (and to return your
machine to normal reception until the next time):
1 Press / PROGRAM , O [the letter O, not a zero], 2, ENTER .
If you using the Soft key (see page 2.24), press the Soft key instead of this
operation. The
LCD shows:
2 Use the numeric keypad to enter the passcode. Here, we’ve entered 6296:
3 Press ENTER .
• If you’ve entered the correct passcode, your fax machine will print all docu-
ments in its memory and then erase them. Then it will turn security
reception off until the next time you’ve scheduled security reception or the
Soft key which programmed security reception is pressed. If you using the
Soft key, the
LED light of the Soft key will be off.
• If you’ve entered an incorrect passcode, your fax machine will refuse to
print, and security reception remains on.
Masking the
PIN
To prevent unauthorised long-distance calls, some office telephone systems require
you to enter a personal identification number (
PIN ) whenever you dial long distance.
Your fax’s PIN mask feature helps you keep that PIN number private. With the PIN
mask activated, you can dial a fax number plus a PIN , but the PIN will not appear in
a journal, error message printout, delayed command list or a TCR . The PIN may be up
to eight characters in length. It also can include the * or # symbols, and it can be
entered from the numeric keypad.
There are three possible settings for the
PIN mask:
• Off — Turns off the PIN mask feature. Any PIN you enter will appear on any dis-
play or printout which shows the number you dial.
• Mode 1 — Each remote fax unit has a departmental PIN access code.
• Mode 2 — Each fax user has a departmental PIN access code.
Note: If you select Mode 1 and you will use a one-touch or speed-dial number, you
must store the remote unit’s PIN access code within that number. However, if
you select Mode 2, this isn’t necessary. (See “Autodialling while using the PIN
mask,” next page, right column for further details.)
Note: If you select either Mode 1 or Mode 2 and will be using batch transmission
(see pages 2.20 – 2.23), you must store the PIN access code for the remote
unit within the appropriate batch box.
Activating the PIN mask
Important: For this feature to work, you must have activated the passcode protec-
tion as described on page 2.59. You must also know the passcode.
1 Press / PROGRAM , J , 1, 8, ENTER . The LCD shows:
2 Use the numeric keypad to enter the four-digit passcode. Here, we’ve entered
6296.
Note: If you enter an invalid passcode, the machine’s security feature rejects
the attempt and returns to standby mode.
3 Press ENTER .
PIN Mode: Off
Program/Enter
Set PIN Mode
Enter Passcode: 6296
Set PIN Mode
Enter Passcode: ****
Print Mem Rx Doc.
Enter Passcode: 6296
Print Mem Rx Doc.
Enter Passcode: ****
2.61