Muratec F-160 - Manual (Page 50)

Beyond the Basics
Printing a delayed command list
Your machine can print a command list which tells you:
• The command’s identification number
• The phone number, or “remote location”
• The start time (this appears in a
DD , HH : MM format)
• A “note” telling if the command is a polling or F-Code operation (see pages
2.29–2.31 for more on polling and 2.35–2.44 for more on F-Code communication).
To print a delayed command list, press / PROGRAM , F , 1, ENTER .
Printing a stored document
Your fax machine can print out each document stored for delayed transmission. To
print a stored document, you’ll need to know the document’s command number,
which you can get by either reviewing the commands (see page 2.18) or printing a
delayed command list (see above).
1 Press / PROGRAM , F , 2, ENTER . The LCD shows:
2 Use the numeric keypad to enter the command’s identification number, 01– 99.
For example, we could enter the following for the very first command, 01:
3 Press ENTER . Your fax machine will print a copy of the stored document.
Print Stored Doc.
Command No.: 01_
Print Stored Doc.
Command No.: _
2.19