Muratec F-160 - Manual (Page 77)

Beyond the Basics
4 Press ENTER . The LCD asks for the type of operation you want to program into
the programmable one-touch:
Note: If you’re changing a previously stored command, skip to step 7.
5 Press / PROGRAM repeatedly until “Comm.” appears.
6 Press ENTER . The LCD now shows either:
or
7 Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
Your display can show only 20 characters at a time. To view characters beyond
those 20, press
to scroll to the left or / PROGRAM to scroll to the right.
Important: Do not press ENTER .
Note: To erase characters, press CANCEL to erase to the left.
If you want to change just one character in the number, press to
move the cursor left, or / PROGRAM to move it right. Press CANCEL to
erase it. Then re-enter the number correctly.
8 Now, while you can still see the fax number on the LCD , press COM - OPTIONS ,
ENTER . The LCD shows:
9 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, “Do this at 5:05
PM on the 30th.”)
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, “Do this at 5:05
PM today.”)
To select this option, use the numeric keypad to enter 0, 0 and
then the time the fax should perform the command:
10 Press ENTER , ENTER . The LCD asks if you want to make additional settings for
this programmable one-touch number.
If you do not want to make additional settings, press ENTER . Skip to step 26.
If you do want to make additional settings, press / PROGRAM and ENTER .
11 The LCD asks which resolution you want to use for this programmable one-
touch number.
12 Press / PROGRAM until the mode you want appears.
Note: For any of the following settings, choosing “---” tells the machine to
use its default setting for this programmable one-touch key.
13 Press ENTER . The LCD asks you to select a contrast mode for each programma-
ble one-touch number.
68: Contrast: ---
Program/Enter
68: Primary: ---
Program/Enter
68: Option: Off
Program/Enter
Delayed
Enter Time: 00/17:05
Delayed
Enter Time: 30/17:05
Delayed
Enter Time: 11/20:30
68:Fax#/Com-Options
9-5550629_
68:Fax#/Com-Options
9-5558743_ 68:Fax#/Com-Options
_
68: Type: Comm.
Program/Enter
68: Type: Comm.
Program/Enter
2.46