Muratec F-160 - Manual (Page 80)

Beyond the Basics
22 Press ENTER . The LCD asks if you want to turn the Copy & Fax feature on or
off for this programmable one-touch number.
23 Press / PROGRAM until the mode you want appears.
24 Press ENTER .
25 The LCD now displays the next programmable one-touch key.
If you do not want to enter or change any other key’s programming, press STOP .
Your machine returns to standby mode.
If you do want to enter or change this key’s programming, go back to step 4.
If you want to enter or change another key’s programming, go back to step 2.
Programming regular polling
Note: You cannot program continuous polling into a programmable one-touch key.
For more information on continuous polling, see page 2.30.
To program a regular polling operation into a programmable one-touch key:
1 Press / PROGRAM , C , 1, ENTER . The LCD shows an empty programmable one-
touch number:
Note: If a programmable one-touch number other than 65 appears on the
LCD , it means that you have already entered a number for 65.
Note: To erase a programmable one-touch key, see page 2.58.
2 Press the key that you want to program or change. Here, we’ve selected 72.
Note: If your previous command for this key was for a polling transmission
and you want to keep this key programmed for a polling transmission,
use these instructions to make changes. But if you want to assign this
key to a completely different operation (for a delayed transmission, for
example), then you first must erase the stored command before pro-
gramming the new one.
3 If you want to select a different programmable one-touch key than the one
that appears on the
LCD , press that key now.
4 Press ENTER . The LCD asks for the type of operation you want to program into
the programmable one-touch:
Note: If changing a previously stored command, skip to step 7.
5 Press / PROGRAM until “Comm.” appears.
6 Press ENTER . The LCD now shows either:
or
7 Use the numeric keypad to enter the number exactly as your machine should
dial it, including whatever codes your phone system requires. The number can
be up to 40 characters in length:
Your display shows only 20 characters at a time. To view characters beyond
those 20, press
to scroll to the left or / PROGRAM to scroll to the right.
Important: Do not press ENTER .
Note: To erase characters, press CANCEL to erase to the left.
To change just one character in the number, press to move the cur-
sor left, or / PROGRAM to move it right. Press CANCEL to erase it.
Then re-enter the number correctly.
8 Next, while you can still see the fax number on the LCD , press COM - OPTIONS
twice and then press ENTER .
9 If you want the polling to begin immediately every time you press the key,
press
ENTER and skip to step 12.
If you want to delay the polling, press COM - OPTIONS , ENTER .
72:Fax#/Com-Options
9-5550696_
72:Fax#/Com-Options
9-5558743_ 72:Fax#/Com-Options
_
72: Type: Comm.
Program/Enter
72: Type: Comm.
Program/Enter
Select Program No.
72:No Number Stored
Select Program No.
65:No Number Stored
66: Copy&Fax: ---
Program/Enter
2.49