Muratec F-160 - Manual (Page 54)

Beyond the Basics
Erasing an empty batch box
Batch boxes must be empty to be erased. If a box has documents stored in it, then
you first have to erase those documents. See page 2.22.
To erase an empty batch box:
1 Press / PROGRAM , N , 5, ENTER . The LCD shows:
or
2 Use the numeric keypad to enter the number (1–5) of the batch box you want
to erase. Here, we’ve pressed 2 and see:
3 If you want to erase a different batch box than what appears on the LCD , enter
that batch box’s number now.
4 Press ENTER . If the batch box is empty, the LCD shows:
Important: If you select a batch box which is not empty, the machine beeps
and briefly displays:
Erase any documents stored in the batch box (see page 2.22),
then go back to step 3.
Important: If you want to quit without erasing the batch box you’ve
selected, press / PROGRAM . The fax will return to step 2.
Important: If you want to quit without erasing any batch box, press STOP .
The machine returns to standby mode.
5 Press ENTER to erase the batch box.
To erase another batch box, repeat steps 2–5. To finish, press STOP .
Erase Batch Box
** Complete **
Select Batch Box
Document Stored
Erase Batch Box
Check Program/Enter
Select Batch Box
2:9-1-972-5559900
Select Batch Box
1:9-5551023 Select Batch Box
1:No Number Stored
2.23