Muratec F-160 - Manual (Page 64)

Beyond the Basics
Audible alarm
Whenever your fax machine receives a document from another fax machine, your
machine will sound the alarm tone alerting the person for whom the document is
intended.
Important: The alarm tone is sounding until either the person presses STOP or
another document is received.
Note: Your machine does not sound the alarm during:
• Polling
• Call request
• F-Code reception
• Turning off this feature
To toggle this audible alarm feature on or off:
1 Press PROGRAM , J , 2, 2, ENTER .
If the setting you see is acceptable, skip to step 3.
Otherwise, proceed to step 2.
2 To change the setting, press PROGRAM once or twice until your desired choice
appears. Here, we’ve chosen On.
3 Press ENTER to save the setting.
Using alternative telephone network service
providers
Your fax machine is fitted with a Soft Key on the control panel to allow easy access
to other telephone networks such as Cable & Wireless (Mercury) for the U.K.
Important: For this feature to work, you must have assigned the function of
access to alternative telephone network to one Soft Key as described on
page 2.24.
The following information describes how to program the Soft Key for the Cable &
Wireless (Mercury). For other networks you will have to program the appropriate
access number in place of the Mercury access number. You can enter the number up
to 40 digits.
1 Press PROGRAM , J , 2, 3, ENTER .
2 Enter the Mercury access number on the numeric keypad. In this example,
we’ve entered 131 (Mercury
PIN code service). If you entered 132 (residential
132 service), skip to step 5.
Note: If you wish to access the Mercury network from a PBX , enter the PSTN
access code followed by a dialling pause (the dialling pause is only
necessary on pulse dial
PBX ’s) before you enter the 131 or 132.
i.e., 9-/131-/ PIN , or 9-/132 if a pause is required.
3 Press REDIAL / PAUSE on the control panel to enter a “ -/ ” in the LCD . This
instructs your fax machine to wait for a Mercury dial tone before dialling the
PIN number.
4 Now enter your PIN number (10 digits).
Note: If you wish to erase your PIN number, press CANCEL to erase all pro-
grammed numbers before proceeding to step 5.
5 Press ENTER to save the setting.
Dial Prefix No
131-/1234567890_
Dial Prefix No
131-/_
Dial Prefix No
131_
Dial Prefix No 00
_
Audible Alarm: On
Program/Enter
Audible Alarm: Off
Program/Enter
2.33