Muratec F-160 - Manual (Page 55)

Your fax machine has numerous special features to make your communications easier.
We’ll cover them here.
Soft Keys
Soft Keys are shortcut keys. You can program the soft keys on the control panel to
turn on or off any function with just the touch of a button. Your machine has four
Soft Keys. If the light above any one of these keys glows, that means the setting
programmed into that key is active.
These keys are programmed at the factory to turn the following functions on or off:
• Memory transmission (see page 1.13)
• Confirmation stamp (see page 2.6)
• Security reception (see page 2.60–2.61)
• Department codes (see page 2.66)
Note: The keys that are programmed at the factory turn the functions above them
on and off, but only for the next transmission that you send from your fax
machine. Once that transmission is complete, your machine returns to its
default setting.
But instead of using the Soft Keys to control the functions above, you can program
them to turn other functions on or off. These functions are:
• Activity journal printouts (see page 2.27)
• Half-page reception (see page 2.3)
• ECM (see page 2.4)
• Closed network (see page 2.64)
• Cover page (see page 2.26)
• Operation protection (see page 2.59)
• Quick memory transmission (see page 2.29)
• Department protection (see page 2.67)
• Copy & Fax feature (see page 2.25)
• Access to alternative telephone network (see page 2.33)
• Flash signal (see page 2.7)
Note: And instead of just turning the function on or off for the next transmission,
as the factory-set keys do, changing the Soft Key settings actually sets the
default for your fax machine. (These default settings can be changed, if
necessary. They are not permanent.)
Setting the Soft Key
1 Press / PROGRAM , E , 1, ENTER . The LCD shows:
. . . or indicates another function you’ve stored into this key.
2 Press or / PROGRAM until the Soft Key (1-4) you want to change appears.
In this example, we’ve chosen 3.
3 Press ENTER . The LCD shows:
4 Press or / PROGRAM until the function appears that you want to program
into the key. In this example, we’ve chosen Quick Tx.
5 Press ENTER to save the setting.
The LCD will display the next Soft Key.
If you do want to set this Soft Key, go back step 3.
If you do not want to set the currently displayed Soft Key but do want to set
another Soft Key, go back to step 2.
If you do not want to set any more Soft Keys, press
STOP to finish.
Now you can use the labels included in your machine’s original packaging to label
the Soft Key function you just set. You can also print out a list of the Soft Keys (see
below).
Printing a list of Soft Keys
A list of your Soft Keys includes each key’s number and the function you’ve assigned
to it.
To print the list, press
/ PROGRAM , E , 2, ENTER .
3:Quick Tx
Program/Enter
3:Security
Program/Enter
Select Soft Key No.
1:Memory Tx
Beyond the Basics
2.24
Special features