Muratec F-160 - Manual (Page 41)

Beyond the Basics
One-touch fax dialling
To dial a fax call using a one-touch number:
1 Insert the document.
2 Adjust resolution and contrast if necessary.
3 Toggle between transmission from the feeder or from memory if necessary, by
pressing
MEMORY TRANSMIT .
4 Press the one-touch key in which you’ve stored the number.
What happens next depends on whether you specified transmission from memory or
transmission from the feeder:
If you specified Quick Memory transmission:
• Your fax machine scans the first page of your document into memory, then dials
the other fax machine.
• While dialling, your machine scans the other documents into memory.
• The
LCD shows the Location ID and the document’s width and resolution settings:
Note: If the entry doesn’t have a Location ID , the number appears.
• When the other machine answers, your fax transmits the scanned document
directly from memory. (To review Quick Memory transmission, see page 2.29.)
If you specified normal transmission from memory:
• Your fax machine scans your entire document into memory first, then dials the
other fax machine.
• The LCD shows the Location ID and the document’s width and resolution settings:
Note: If the entry doesn’t have a Location ID , the number appears.
• When the other machine answers, your fax transmits the document directly from
memory. (To review memory transmission, see page 1.13.)
If you specified transmission from the feeder:
• Your fax machine dials the other fax machine.
• When the other machine answers, your fax feeds the document through its scan-
ner, transmitting as it goes.
• The LCD shows the Location ID and the document’s width and resolution settings:
Note: If the entry doesn’t have a Location ID , the number appears.
One-touch phone dialling
To dial a phone call using a one-touch number, you must have an optional handset
attached to your machine. (Contact your authorised Muratec dealer to order an
optional handset.)
To make the call:
1 Obtain a dial tone by doing one of the following:
• Lift the handset
• Press
MONITOR / CALL to use the monitor speaker
2 Press the one-touch key in which you’ve stored the number. As the machine
dials, it shows the number on the
LCD :
Note: Remember that your fax machine’s monitor speaker is not a speakerphone.
If you dialled by using the monitor speaker, pick up the handset to speak to
the person that answers.
Note: If the call fails, and you used MONITOR / CALL to dial, press MONITOR / CALL to
hang up.
Erasing a one-touch number
1 Press / PROGRAM , A , 2, ENTER . The LCD shows the one-touch number you
have already entered:
Note: If the one-touch number that appears is other than 01, it means that
01 is empty.
Select One-Touch
01:9-1-555-345-6789
** Tel Mode **
9-555-2842_
Katz’s Cat Care
A4 Normal
Katz’s Cat Care
A4 Normal
Katz’s Cat Care
A4 Normal
2.10