Muratec F-160 - Manual (Page 75)

Beyond the Basics
13 Press START .
If in step 10 you chose an immediate transmission, your fax machine begins
dialling. If you chose a delayed command, the machine shows “Reserved” on the
LCD ,
indicating that it has stored the command in memory and will complete it later.
F-Code polling
1 Press COM - OPTIONS six times and then press ENTER .
2 Use the numeric keypad to enter the appropriate sub-address.
In this example, we’ve entered 123456.
Note: If you make a mistake, press CANCEL to erase the character, then
enter the correct number.
3 Press ENTER . The LCD shows:
Note: If this sub-address does not have a password, skip to step 5.
4 Use the numeric keypad to enter the password. In this example, we’ve
entered 654321.
5 Press ENTER . The LCD shows:
6 Enter the fax number either by pressing a one-touch key, entering a speed-
dial number or dialling from the numeric keypad. Do not press
START .
7 What you do now depends upon when you want the polling to begin.
• To have it begin now, skip to step 10.
• To delay it, go on to step 8.
8 Press COM - OPTIONS , ENTER . The LCD shows:
9 Use the numeric keypad to enter the day and time when the polling should
begin, then press
ENTER .
10 Press START .
If in step 7 you chose an immediate polling, your fax machine begins dialling. If you
chose a delayed command, the machine shows “Reserved” on the
LCD , indicating that
it has stored the command in memory and will complete it later.
Delayed
Enter Time: 15/17:05
Enter Fax Number
_
Enter Password
654321_
Enter Password
_
Enter Sub-Address
123456_
Enter Sub-Address
_
2.44