Muratec F-160 - Manual (Page 51)

Beyond the Basics
Batch transmission allows you to store multiple documents in an electronic “basket”
throughout the day and then fax that entire basket to one location.
To do this, just tell the machine when and where the transmission should go. When
that date and time arrives, your machine will transmit each document in the batch
box to the remote fax machine. You can store up to 40 documents (each document
can include one page or many pages) into your machine’s five electronic batch boxes.
Creating or modifying a batch box
Before sending a batch transmission, you have to create batch boxes in your fax
machine. The steps below also let you modify existing batch boxes.
To create or modify a batch box:
1 Press / PROGRAM , N , 1, ENTER . Depending on whether you already have a
number entered for batch box 1, the LCD shows:
or
2 Use the numeric keypad to enter the number (1–5) of the batch box you want
to create or modify. Here, we’ve pressed 3 and see either:
or
3 If you want to select a different batch box than the one displayed on the LCD ,
use the numeric keypad to enter the batch box number now.
4 Press ENTER . The LCD now shows either:
or
5 Use the numeric keypad to enter the fax number exactly as your machine
should dial it, including whatever access codes your phone system requires.
(You may want to review “Special dialling characters,” page 2.7.) The number
can be up to 40 characters in length:
Your display can show only 20 characters at a time. To view characters beyond
those 20, press
to scroll to the left or / PROGRAM to scroll to the right.
Note: To erase characters, press CANCEL to erase to the left.
To change just one number, press to move the cursor left, or
/ PROGRAM to move it right. Press CANCEL to erase it. Then re-enter
the number correctly.
6 When the number appears as you want it, press ENTER . The LCD now displays:
7 Instruct your fax to send from this batch box in one of the following ways:
Option 1: Once at a certain time on a certain day of the month (For exam-
ple: “Do this at 5:05
PM on the 30th.”) — Use the numeric keypad
to enter the date and time (24-hour format) the machine should
send the documents from the batch box:
Option 2: At a certain time each day you press the key (For example: “Do
this at 5:05
PM today.”) — Use the numeric keypad to enter 0, 0
(00), and then the time when the fax should send the documents
from the batch box:
Note: To change a digit in the date or the time, press to move the cursor
left or / PROGRAM to move it right. Then enter the correct number.
8 When the date and time are set, press ENTER .
9 The LCD now displays:
or
The machine now asks you to name this batch box.
If you do not want to enter or change this batch box’s name, skip to step 11.
3:Name ;Upper
Bookkeeping_ 3:Name ;Upper
_
3:Transmit Time
Enter Time: 00/17:05
3:Transmit Time
Enter Time: 30/17:05
3:Transmit Time
Enter Time: 26/14:00
3:Fax Number
9-1-555-871-9052_
3:Fax Number
9-555-2110_ 3:Fax Number
_
Select Batch Box
3:9-555-2110 Select Batch Box
3:No Number Stored
Select Batch Box
1:9-1-555-345-6789 Select Batch Box
1:No Number Stored
2.20
Batch transmission