Muratec F-160 - Manual (Page 70)

Beyond the Basics
23 Press ENTER to save the settings. The LCD shows:
On: Print the document automatically when it’s received.
Off: The machine does not print it, but only relays it to the other machine.
Press or / PROGRAM until the mode you want appears.
Then press ENTER to save the settings and go on to step 24.
24 The machine asks for your F-Code box’s four-digit security I . D . code. This is
the I . D . code for the box’s security, which you use to (1) print a document any
remote F-Code-compatible fax sends to this F-Code box or (2) you enter before
you can make any changes to this F-Code box.
If you do not want to change the I . D . code, skip to step 27.
25 Decide on a four-digit I . D . code (0001-9999) for this F-Code box.
Write it down, and put it in a safe place.
Important: Do not use 0000 as an I . D . code.
26 Use the numeric keypad to enter the four-digit I . D . code for this F-Code box.
Important: After completing this step, you must know this code to print
documents sent to this F-Code box. Be sure to write it down.
27 Press ENTER to save the F-Code box information.
To create or modify another F-Code box, repeat steps 3-27.
To finish, press
STOP .
Printing a list of F-Code boxes
The list of F-Code boxes includes:
(1) Each box’s identifier number
(2) Box name (if any)
(3) Sub-address
(4) Password
(5) Box type
(6) Each box’s settings
To print a list of your F-Code boxes, press / PROGRAM , P , 2, ENTER .
Printing a list of documents stored in
your F-Code boxes
The list of documents stored in your machine’s F-Code boxes includes:
(1) Each box’s identifier number
(2) Box name (if any)
(3) Box type
(4) Each file number (or document number) that is stored
To print a list of documents stored in F-Code boxes, press / PROGRAM , P , 3, ENTER .
Using a bulletin box
Storing a document
Your fax machine can store up to 30 documents in each bulletin box.
Note: For this operation to work, two things must be true:
• The bulletin box must exist on your fax machine.
• You must know the bulletin box’s two-digit number (01-50) and four-digit
I . D . code. (See “Creating or Modifying an F-Code box”, if necessary.)
To store a document in a bulletin box for polling.
1 Insert the document and make any necessary adjustments.
2 Press / PROGRAM , P , 7, ENTER The LCD shows:
or
3 Use the numeric keypad to enter the two-digit identifier number (01-50) of
the F-Code box where you want to store the document.
Here, we’ve entered 0, 3:
4 If you want to use a different F-Code box than the one that appears on the
LCD , enter the box number now.
5 Press ENTER . The LCD shows:
03:Set F-Code Doc.
Enter I.D. Code:****
Select F-Code Box
03:Muratec America
Select F-Code Box
01:Murata Machinery Select F-Code Box
01:No Number Stored
03:Set F-Code Box
Enter I.D. Code:0000
Auto Print: Off
Program/Enter
2.39