Muratec F-160 User Manual
Page 96
Beyond the Basics
4
The
LCD
now asks if you want to enter a number:
If you want to enter or modify a number, press
ENTER
and go on to step 5.
Otherwise, press /
PROGRAM
and skip to step 10.
5
Depending on if you have already entered at least one number into the
blocked numbers list, the display shows one of the following:
or
6
If you want to modify an existing entry in the blocked numbers list, press
or /
PROGRAM
until you see the number you want to modify.
… or …
If you want to enter a new number in an already-started blocked numbers
list, press or /
PROGRAM
until you find an empty position in the list.
Then press
ENTER
to enter or modify the blocked number.
Note: To clear a number from the list, see “Clearing a number from the
blocked numbers list,” right column.
7
Use the numeric keypad to enter the last eight characters of a fax number you
want to block. For example, if you want to block a fax from someone with a
Subscriber
ID
of 972-555-3038, you should enter 5, 5, 5, -, 3, 0, 3, 8:
To change a specific digit, press
to move left or /
PROGRAM
to move right
until the cursor is under the digit, then use the numeric keypad to enter the
correct number.
8
Press
ENTER
to save the setting. The display shows the next “slot” in the
blocked numbers list.
If you do not want to enter or change a number for this slot, go on to step 9.
If you do want to enter or change a number for this slot, repeat steps 5–8.
9
Press
STOP
. The display now asks if you want to print the list.
10
If you do want to print the list, press
ENTER
and your machine will print it.
If you don’t want to print it, press
STOP
and your machine will return to
standby mode.
Clearing a number from the blocked numbers list
To clear a number from the list:
1
Press /
PROGRAM
,
J
, 1, 2,
ENTER
.
If your Block Junk Fax setting is either Mode2 or Mode3, skip to step 3.
2
Press or /
PROGRAM
until you see your preference, Mode2 or Mode3.
3
Press
ENTER
,
ENTER
. The display shows:
4
Press or /
PROGRAM
until you see the number you want to clear.
5
Press
CANCEL
to clear the number.
To clear another number from the blocked numbers list, repeat steps 4–5.
Otherwise, go on to step 6.
6
Press
STOP
. The display now asks if you want to print the blocked numbers
list.
If you do want to print the list, press
ENTER
and your machine will print it.
Otherwise, press
STOP
to return your machine to standby mode.
Print BlockJunk Dial
Enter/Stop
Select BlockJunk No.
01:555-2971
Block Junk Fax:Mode2
Program/Enter
Block Junk Fax:Off
Program/Enter
Print BlockJunk Dial
Enter/Stop
Enter Fax Number
01:555-3038
Select BlockJunk No.
01:555-2971
Enter Fax Number
01:_
Set BlockJunk Dial
Program/Enter
2.65