Sanyo CHX06052 - Manual (Page 184)

6-6
Service Checker
1. Outdoor Unit Maintenance Remote Controller
Concerning the 7-segment 4-digit display of remote controller timer time
Display of unit Nos. 1 20
Display of unit Nos. 21 40
The unit Nos. of connected units are indicated by four 7-segment digits and a colon.
Meaning of colon
Meaning of colon
The meaning of the colon changes in the same way to indicate unit Nos. up to 80.
Sample displays of connected indoor unit Nos.
Display of unit No. 1
Display of unit Nos. 1 and 2
Display of unit Nos. 1, 2, and 3
Display of unit Nos. 1, 2, 3, and 4
The change of the colon display (between unit Nos. 1 20 to unit Nos. 21 40) occurs automatically
every 10 seconds. (However the display does not change if there are no higher-number units connected.)
To change the display to the higher-number units before 10 seconds have passed,
press the (FLAP) button.
An 8-digit display is used for display of the compressor total operating time (in 1-hour units).
When the first 4 digits are displayed, the bottom dot of the colon is illuminated. (Figure (A))
When the last 4 digits are displayed, the colon dot is OF F. (Figure (B) )
The display of the first 4 digits and last 4 digits changes automatically after 10 seconds.
The display can also be changed by pressing the (FLAP) button.
<Compressor total operating time>:
(A) and (B) are displayed alternately
(The example here (0000, 0062)
indicates 62 hours.)
Sample Display (A), (B)
21 – 40 1 – 20 41 – 60 61 – 80
21 – 40 1 – 20 41 – 60 61 – 80
12
11
13
14
15
17
16
18
19
20
2
1
3
4
5
7
6
8
9
10
32
31
33
34
35
37
36
38
39
40
22
21
23
24
25
27
26
28
29
30
1
2
3
4