Sanyo CHX06052 - Manual (Page 23)

2-5
Remote Control Functions
2
2. Wireless Remote Controller
Optional Controller (Remote Controller)
Wireless Remote Controller / RCS-SH80AAB.WL (for X type) / RCS-TRp80AAB.WL (for A, T Type) / RCS-
BH80AAB.WL (for U, D Type) / RCS - SH1AAB (for K type)
1. How to Use the Wireless Remote Controller
A: ON/OFF operation button This button is for turning the air conditioner on and off.
B: Transmitter When you press the buttons on the wireless remote control unit, the mark
appears in the display to transmit the setting changes to the receiver in the
air conditioner.
C: MODE button Use this button to select one of the following five operating modes.
(AUTO) : Used to automatically set cooling or heating operation. Only for single
heat pump type
(HEAT) : Used for normal heating operation. Only for heat pump type
(DRY) : Used for dehumidifying without changing the room temperature.
(COOL) : Used for normal cooling operation.
(FAN) : Used to run the fan only, without heating or cooling operation.
D: Temperature setting
buttons
: Press this button to increase the temperature setting.
: Press this button to decrease the temperature setting.
E: FAN SPEED selector button
(AUTO)
(HI)
(MED)
(LO)
: The air conditioner automatically decides the fan speeds.
: High fan speed
: Medium fan speed
: Low fan speed
Continued
(Temperature range: 17 to 27
o
C)
(Temperature range: 16 to 26
o
C)
(Temperature range: 18 to 30
o
C)
(Temperature range: 18 to 30
o
C)
The illustration above pictures the wireless remote control unit after the cover
has been lowered and removed.
I: FLAP button
Q: Slide switch
L: SET button
P: ACL button
(ALL CLEAR)
A: ON/OFF operation button
B: Transmitter
D: Temperature setting buttons
H: A/C SENSOR button
N: VENTILATION button
J: TIMER SET button
O: Remote control sensor
F: FILTER button
K: Time setting buttons
G: ADDRESS button
E: FAN SPEED selector button
M: CL button
C: MODE button
NOTE
A: ON/OFF operation button This button is for turning the air conditioner on and off.
B: Transmitter When you press the buttons on the wireless remote control unit, the mark appears in the
display to transmit the setting changes to the receiver in the air conditioner.
C: MODE button Use this button to select one of the following five operating modes.
(AUTO) : Used to automatically set cooling or heating operation. Only for single heat pump
type
(Temperature range: 62 ~ 80°F (17 to 27°C))
(HEAT) : Used for normal heating operation. Only for heat pump type
(Temperature range: 60 ~ 78°F (16 to 26°C))
(DRY) : Used for dehumidifying without changing the room temperature.
(Temperature range: 64 ~ 86°F (18 to 30°C))
(COOL) : Used for normal cooling operation.
(Temperature range: 64 ~ 86°F (18 to 30°C))
(FAN) : Used to run the fan only, without heating or cooling operation.
D: Temperature setting buttons :
: Press this button to increase the temperature setting.
Press this button to decrease the temperature setting.
E: FAN SpEED selector button
(AUTO) : The air conditioner automatically decides the fan speeds.
(HI) : High fan speed
(MED) : Medium fan speed
(LO) : Low fan speed
Continued
MiniECO-i.indb 5 2007/06/20 16:28:06