Sanyo CHX06052 - Manual (Page 62)

2-44
Remote Control Functions
3. Timer Remote Controller (RCS-TM80BG)
<Description>
Calls the details of past failures.
<Procedure>
Refer to the remote controller display.
Press and hold the (SET) and
(TEST/CHK) buttons simultaneously for 4 sec-
onds or longer to engage service check mode.
The service check display illuminates. Initially,
item code , and the details of the most recent
alarm, are displayed. The number of the indoor
unit where the alarm occurred, and the details of
the alarm, are displayed.
To monitor a different failure history, press the
temperature setting / buttons to
change the failure history number (item code).
Item code (most recent)
m
Item code
(oldest)
4 items are stored in the failure history.
Press the (CANCEL) button to clear all
items from the indoor unit alarm history.
Press the (TEST/CHK) button to return to
normal display.
4
3
NOTE
2
1
Procedure:
Returns to normal display.
1 2 3 4
Press only when you wish to clear all history items.
( )
1
2
3 4
History clear
N Calling the Failure History
MiniECO-i.indb 44 2007/06/20 16:28:57