Lincoln Electric NA-5S - Manual (Page 125)

F-72 TROUBLESHOOTING & REPAIR F-72
PROCEDURE
Before starting the following procedure,
refer to the
PC Board
Troubleshooting Procedures at the
beginning of this section.
1. Remove the input power to the NA-
5.
2. Using the 5/16" nutdriver open the
control box PC board cover.
3. Carefully remove the molex type
plugs (and leads) connected to the
PC board that is to be removed.
4. Using the phillips head screwdriver,
remove the PC board mounting
screws.
5. Carefully remove the PC board.
REPLACEMENT PROCEDURE
1. Using the phillips head screwdriver
and mounting screws carefully posi-
tion and install the new PC board.
2. Reconnect the molex type plugs
(and leads) into the new PC board.
3. Close and secure the access door.
PC BOARD(S) REMOVAL AND REPLACEMENT (Continued)
NA-5
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC