Lexicon RT-10 - Manual (Page 103)

Playback Controls
Lexicon
4-10
To store preferred disc settings:
1. Make sure a DVD-V that allows selection of on-screen display
disc menu language, audio track (audio language and output
format), subtitle language, camera angle, Video Adjust, or
parental security level settings is loaded.
2. Refer to the Navigating Disc Menus section (4-3) for
instructions to select on-screen display disc menu language,
audio track (audio language and output format), subtitle
language, camera angle, Video Adjust, or parental security level
settings.
• In some cases, certain remote control buttons can also be
used to select disc settings without navigating through the
disc menu. Refer to pages 4-7 to 4-9 for more information.
3. When the desired disc settings have been selected, press the
Play button to activate playback.
• Pressing the Play button might not activate playback when
the disc menu is open on the on-screen display. If this
occurs, press the remote control MENU or TOP MENU
button to close the disc menu. Then, press the Play button
again to activate playback.
4. When playback is activated, press the CONDITION MEMO
button. The Condition Memory bar shown below will open at
the top of the on-screen display to indicate that preferred disc
settings have been stored for the loaded disc. Once stored,
these settings will be automatically recalled whenever the disc
is loaded.
STORING DISC SETTINGS
• Pressing the remote control CONDITION MEMO button
activates condition memory mode, which stores preferred disc
settings for up to 15 DVD-Vs. Once stored, these settings will
be automatically recalled whenever the disc is loaded.
• Preferred disc settings can be stored for DVD-Vs that allow the
selection of on-screen display disc menu language, audio track
(audio language and output format), subtitle language, camera
angle, Video Adjust, or parental security level settings.
Preferred disc settings cannot be stored for other disc formats
or for DVD-Vs that do not allow at least one of these selections.
• Preferred disc settings cannot be stored for selections the loaded
DVD-V does not allow. For instance, if the loaded DVD-V does
not allow selection of an on-screen display disc menu language
setting, a preferred on-screen display disc menu language
setting cannot be stored. However, preferred disc settings can
still be stored for other selections the loaded DVD-V allows.
• Preferred disc settings can be stored for up to 15 DVD-Vs. The
oldest set of preferred disc settings is automatically deleted
when the sixteenth set of preferred disc settings is stored.
All preferred disc settings are automatically deleted when
factory-default settings are restored.
• Most DVD-Vs include disc menus can be used to select disc
settings. In some cases, certain remote control buttons can also
be used to select disc settings without navigating through the
disc menu. Refer to page 4-7 to 4-9 for more information.
• Disc menu settings do not affect Setup or Advanced Setup
menu parameter settings.
CONDITION
MEMO
Condition Memory