Lexicon RT-10 - Manual (Page 114)

Playback Controls
RT-10
4-21
A-B REPEAT PLAYBACK
• The remote control A-B button can be used to activate A-B
repeat playback from a user-defined start time (point A) to a
user-defined end time (point B). A-B repeat playback can be
configured to repeat playback of the user-defined playback
loop once or continuously.
• A-B repeat playback is not available for Video CDs and SVCDs
that include PBC menus.
• A-B repeat playback is automatically deactivated when:
– random or repeat playback is activated
– the remote control CLEAR, STOP, PREV, NEXT, RANDOM,
or REPEAT button is pressed
To activate A-B repeat playback:
1. When playback is activated, press the A-B button at the desired
start time (point A). The Memory bar shown below (left) will
open at the top of the on-screen display to indicate that a start
time has been selected.
• To repeat the user-defined playback loop once, proceed to
step 2.
• To repeat the user-defined playback loop continuously,
proceed to step 3.
A-B
2. Press the Play button at the desired end time (point B). The
Repeat Memory bar shown below (center) will open at the top
of the on-screen display to indicate that an end time (point B)
has been selected. When the Repeat Memory bar opens, A-B
repeat playback is automatically activated. When the user-
defined end time (point B) is reached, regular playback is
automatically activated at that time. Proceed to step 4.
3. Press the A-B button again at the desired end time (point B).
The Repeat A-B bar shown below (right) will open at the top of
the on-screen display to indicate that an end time (point B) has
been selected. When the Repeat A-B bar opens, A-B repeat
playback is automatically activated. Repeat playback of the
user-defined playback loop continues until A-B repeat playback
is deactivated. The instructions end here.
4. To redefine the end time (point B), press the A-B button again
at the desired end time. The Repeat A-B bar shown below
(right) will open at the top of the on-screen display to indicate
that a new end time (point B) has been selected. When the
Repeat A-B bar opens, A-B repeat playback is automatically
reactivated, beginning with the start time (point A) selected in
step 1 and continuing until the end time selected in this step is
reached.
. . . A-B Repeat Playback continues on page 4-22
Search 14.52 Repeat
Time A-B
Search 14.52 Repeat
Time Memory
Memory