Lexicon RT-10 - Manual (Page 69)

Setup Menus
RT-10
3-29
VIDEO2
Includes parameters that control video output format and
on-screen display appearance.
Background Gray, Black
Determines the background color of Setup menu screens when
resume or stop mode is activated. The video output signal appears
behind Setup menu screens when playback or pause mode is
activated.
Video Adjust Start
Opens the Video Adjust bar shown above, which can be used to
make exact, detailed adjustments of video settings such as
luminance (YNR), chrominance (CNR), mosquito (MNR), and black
(BNR) noise reduction, as well as sharpness, white, black, gamma,
hue, and chroma levels. Refer to the Video Adjust parameter
descriptions that begin on the next page for more information.
Note:
The remote control VIDEO ADJ button can also be
used to open the Video Adjust bar.
. . . Video2 continues on page 3-30
Possible Settings Default Setting Parameter
Background Gray
Video Adjust N/A N/A
Still Picture* Auto • Field
• Frame
• Auto
On-Screen Display* On • On
• Off
Angle Indicator* Off • On
• Off
• Gray
• Black
* These parameters only appear when the Setup menu is displayed in expert mode
(3-9 and 3-42).
Background --- Gray
Video Adjust
Still Playback --- Auto
On Screen Display --- On
Angle Indicator --- On
Audio1 Language General V1 A2 Video2
Move Exit SETUP
Gray
Black Background
Video Memory Select
Video Adjust
The loaded disc might cause the Video Adjust
bar to exceed on-screen display margins. If this
occurs, close the Video Adjust bar and remove
the loaded disc from the disc drawer. Then,
open the Video Adjust bar again.
Video Memory Select