Lexicon RT-10 - Manual (Page 66)

Setup Menus
Lexicon
3-26
setting, and the TV Type prompt Standard (4:3) setting is equivalent
to the TV Screen parameter 4:3 (Letter Box) setting. The TV Screen
parameter also offers settings for 16:9 (Compressed) and 4:3
(Pan&Scan) viewing. Refer to the table on pages 3-25 and below
for more information.
Note:
• Some discs do not allow video output format
adjustments.
• Neither the TV Screen parameter nor the TV Type
prompt can be adjusted when the RT-10 is in
playback mode.
Video1 (continued from page 3-25)
TV Screen
(continued)
Select 16:9 (Wide) or 16:9 (Compressed) if the associated display
device screen has a 16:9 aspect ratio. Select Standard 4:3 (Letter
Box) or 4:3 (Pan&Scan) if the associated display device screen has
a 4:3 aspect ratio. The appearance of the picture depends on the
TV Screen parameter or TV Type prompt setting, the video output
format, the loaded disc, and display device settings.
The TV Screen parameter is associated with the Setup Navigator TV
Type prompt (3-5). The TV Type prompt Widescreen (16:9)
setting is equivalent to the TV Screen parameter 16:9 (Wide)
Video Recording
Format
TV Screen
Parameter
Display Device
Aspect Ratio
Display Device
Setting
Appearance
Normal (4:3)
Full (16:9)
Full (16:9)
Full (16:9)
16:9
16:9
16:9
16:9
16:9 (Wide)
16:9 (Wide)
Images appear in widescreen (16:9) format.
16:9
Images appear between black bars at either side of
the screen.
Images appear stretched across the screen. It is
recommended to set the display device to Normal
(4:3).
Images appear between black bars at either side of
the screen. This setting is recommended for display
devices with a fixed aspect ratio and a progressive-
scan component video input connector.
4:3
16:9 (Wide)
16:9 (Compressed)
4:3
4:3