Lexicon RT-10 - Manual (Page 129)

Playback Controls
Lexicon
4-36
To deactivate display mode:
Press the DISPLAY button until the display bar closes.
Display Bar M MP3
No. Description
1 Indicates whether playback or pause mode is activated.
2 Indicates the numbers of the currently playing folder
and track.
3 Indicates the elapsed playback time of the currently
playing track.
4 Indicates the display bar format.
5 Indicates the current transmission rate.
To open a display bar:
1. Make sure playback or pause mode is activated.
2. When playback or pause mode is activated, press the remote
control DISPLAY button to open one of the display bars shown
on pages 4-32 and 4-33. The tables that begin on page 4-32
indicate the display bars available for each disc format.
3. Press the DISPLAY button again to cycle through all display
bars available for the loaded disc.
Display Bars (continued from page 4-35)
The letters and numbers in the display bar illustrations shown on pages 4-32 and
4-33 correspond to the numbered items in the tables that continue below.