Lexicon RT-10 - Manual (Page 141)

Troubleshooting & Maintenance
Lexicon
5-12
PLAYBACK CONTROL ISSUES
The disc menu (4-3) will not open.
1. Attempt to open the disc menu with the remote control MENU
button and TOP MENU buttons. In some cases, pressing these
buttons opens the same disc menu. In some cases, one specific
button must be pressed to open the disc menu. For instance,
the TOP MENU button must be pressed to open DVD-A top
menus.
2. Make sure a disc format that includes a disc menu is loaded.
SACDs, CD-RW/Rs (except those that include MP3 tracks), and
Audio CDs do not include disc menus.
Preferred disc settings (4-10) cannot be stored.
1. Make sure a DVD-V is loaded. Preferred disc settings cannot be
stored for other disc formats.
2. Make sure the loaded DVD-V allows selection of on-screen
display disc menu language, audio track (audio language or
output format), camera angle, subtitle language, Video Adjust,
or parental security level settings. Preferred disc settings cannot
be stored for other disc formats or for DVD-Vs that do not allow
at least one of these selections.
3. Preferred disc settings cannot be stored for selections the
loaded DVD-V does not allow. For instance, if the loaded
DVD-V does not allow selection of an on-screen display disc
menu language setting, a preferred on-screen display disc
menu language setting cannot be stored. However, preferred
disc settings can still be stored for other selections the loaded
DVD-V allows.
Setup Menu Issues (continued from page 5-11)
The Advanced Setup menu will not open.
1. Press the Stop button to activate stop mode. The Advanced
Setup menu cannot be opened unless stop mode is activated.
2. Press the remote control SETUP button to close the Setup
menu. The Advanced Setup menu cannot be opened when the
Setup menu is open.
The DISP_MODE parameter is set to ON, but the front
panel display is still activated.
1. Make sure playback of an SACD, CD, or MP3 is activated.
When the DISP_MODE parameter is set to ON, the RT-10
deactivates the front panel display during SACD, CD, or MP3
playback. The front panel display is not deactivated when other
disc formats are loaded or when stop, resume, or pause mode
is activated.
2. The DISP_MODE parameter might not function as described
on page 3-52 with some SACDs, CDs, or MP3s. If this occurs,
set the DISP_MODE parameter to DISP_OFF so the front panel
display and rear panel video output connectors will function as
normal.