Lexicon RT-10 - Manual (Page 48)

Setup Menus
Lexicon
3-8
Select No if the associated component is not compatible with
96kHz PCM sources. The RT-10 will downsample 96kHz PCM
signals to 48kHz before passing them to the associated component.
Select Yes if the associated component is compatible with 96kHz
PCM sources. The RT-10 will not downsample 96kHz PCM signals
before passing them to the associated component. Selecting the
96kHz PCM Audio Don’t Know setting has the same effect as
selecting the No setting.
The 96kHz PCM Audio prompt is associated with the Audio1 tab
Linear PCM Out parameter, which can be set for compatibility with
PCM digital audio sources.
Note:
The RT-10 always downsamples 192 and 176kHz
signals to 96 and 88.2kHz before passing them to
the associated component, regardless of the 96kHz
PCM Audio prompt and Linear PCM Out parameter
settings.
Digital Jack (continued)
The Digital Jack prompt is associated with the Audio1 tab Dolby
Digital Out (3-12), DTS Out (3-13), and MPEG Out (3-14)
parameters. Each parameter can be independently set for
compatibility with the respective digital audio source. The Digital
Jack prompt Dolby Digital Out, DTS Out, and MPEG Out parameter
settings have no effect when the RT-10 is not using the digital
audio output connector.
Note:
When the Digital Jack prompt is set to Not
Connected, the Setup Navigator proceeds to the Exit
Setup Navigator prompt (3-4). When set to another
setting, the Setup Navigator proceeds to the 96kHz
PCM Audio prompt (below).
96kHz PCM Audio No, Yes, Don’t Know
Controls PCM digital audio output sample rate when the RT-10 is
using the digital audio output connector. This prompt is not
available when the Digital Jack prompt is set to Not Connected.
1
2
3
4
5
Changes are saved
7
Setup Navigator
Save Changes
Delete Changes
Start Again
Audio1 Language General Video1 A2 V2
Move Select Exit
Exit Setup Navigator
Save Changes
ENTER SETUP
!
1
2
Amp Connection
4
5
Digital jacks not compatible with 96kHz
7
Setup Navigator
No
Yes
Don’t Know
Audio1 Language General Video1 A2 V2
Move Select Exit
96kHz PCM Audio
No
ENTER SETUP
!
Setup Navigator (continued from page 3-5)