Lexicon RT-10 - Manual (Page 3)

BEFORE PLUGGING IN THE UNIT FOR THE FIRST TIME,
READ THE FOLLOWING SECTION CAREFULLY: THE
AVAILABLE POWER SUPPLY VOLTAGE DIFFERS AMONG
COUNTRIES AND REGIONS. MAKE SURE THE POWER
SUPPLY VOLTAGE OF THE AREA WHERE THIS UNIT WILL
BE USED MEETS THE REQUIRED VOLTAGE (E.G., 230V
OR 120V) WRITTEN ON THE REAR PANEL. WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
• Do not remove the cover from the unit.
• Do not insert anything into the unit through the ventilation
holes.
• Do not handle the mains lead with wet hands.
• Make a space of about .33ft (0.1m) around the unit.
WARNING
Slots and openings on the case are provided for ventilation. To
ensure reliable operation of the unit, to protect it from
overheating, and to prevent fire hazard, these openings must
not be blocked or covered with items such as newspapers,
table cloths, or curtains. In addition, do not place the unit on a
thick carpet, bed, sofa, or fabric with a thick pile. WARNING
DO NOT PLACE NAKED FLAME SOURCES, SUCH AS LIT
CANDLES, ON THE UNIT. NAKED FLAME SOURCES
MIGHT ACCIDENTALLY FALL DOWN, CAUSING FIRE TO
SPREAD OVER THE UNIT. WARNING
• Use of controls or adjustments or performance of
procedures other than those specified herein may result
in hazardous radiation exposure.
• The use of optical instruments with this product will
increase eye hazard.
CAUTION
LASER SAFETY: This unit employs a LASER. Only a qualified
person should remove the cover or attempt to service this
device, due to possible eye injury.
CAUTION
FOR CANADIAN MODEL:
This Class B digital apparatus complies with Canadian ICES-003.
POUR LE MODELE CANADIEN:
Cet appareil numérique de la Classe B est conforme à la norme NMB-003 due
Canada.
ATTENTION:
POUR ÉVITER LES CHOCS ÉLECTRIQUES INTRODUIRE LA LAME LA
PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA
PRISE ET POUSSER JUSQU’AU FOND.