Lexicon RT-10 - Manual (Page 65)

Setup Menus
RT-10
3-25
TV Screen Refer to the table on the previous page
Controls the appearance of the picture on the associated display
device screen, formatting the aspect ratio of the video output format
to match the aspect ratio of the display device. Aspect ratios, which
refer to width relative to height, differ among video output formats
and display devices. A 16:9 aspect ratio is almost twice as wide as
high and a 4:3 aspect ratio is almost square. TV Screen --- 16:9 (Wide)
Component Video --- Progressive
Video Out --- Video
S-Video Out --- S2
Frame Search --- Off
Screen Saver --- Off
Audio1 Language General Video1 A2 V2
Move Exit SETUP
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
16:9 (Compressed) TV Screen
Video Recording
Format
TV Screen
Parameter
Display Device
Aspect Ratio
Display Device
Setting
Appearance
The picture appears between black bars at the top
and bottom of the screen.
The picture appears cropped at the sides, allowing
the picture to fill the screen. Although the picture on
the screen might seem larger, less of the picture is
actually visible.
4:3 (Letter Box) 4:3 N/A
N/A 4:3 4:3 (Pan&Scan)
16:9
16:9
N/A
N/A
Normal (4:3)
4:3
4:3
16:9
16:9 (Wide)
16:9 (Wide)
4:3 (Letter Box)
4:3 (Pan&Scan)
16:9 (Wide)
The picture appears "squashed." It is recommended
to set the TV Screen parameter to 4:3 (Letter Box) or
4:3 (Pan&Scan)
The picture appears as intended regardless of the TV
Screen parameter setting.
The picture appears "squashed." It is recommended
to set the display device to Full (16:9).
16:9
16:9
4:3
. . . Video1 continues on page 3-26